---
title: RAYCUT Fiber Laser Machine Firmware Index (CNCU local)
source_url: https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/
fetched_at: 2026-08-13T10:54:00Z
category: drivers
pass: cncu-local-raycut-firmware-batch + cncu-local-raycut-deepen
product: RAYCUT Fiber Laser Machine (CypCut / Raycus RFL / SC2000 / RayTools)
---

# RAYCUT Fiber Laser Machine — Firmware Index

Inventory of **Raycus RFL laser-source firmware packages**, **SC2000 cutting-system package**, **Raycus Fiber Laser Management**, **CypCut laser software installers**, and **machine-serial CypCut config / BCS100 height-controller exports** from the local cncu.co.za mirror under `T:\U\C\RAYCUT-Fiber-Laser-Machine\`, mapped to live `https://cncu.co.za/...` URLs.
English prose only. **No pricing.** Firmware binaries / large installers themselves are **not** copied into this KB (pointer + URL only).

## What this firmware is

RAYCUT fiber laser cutters in this tree use a **CypCut** (Friendess/Bochu) cutting control stack with **Raycus RFL** fiber laser sources, **BCS100** capacitive height control, and related **SC2000 / RayTools** tooling. Assets fall into these groups:

1. **Raycus RFL source firmware ZIPs** — `C500S-ST-*` / `C2000H-ST-*` package trees (e.g. **C500S-ST-0653A-V3.6.0**, **C500S-ST-0654-V3.2.0**, **C2000H-ST-0654B-V3.3.0**). Prefer the **newest matching source family / version** when support directs an update (**newer wins** by version string, e.g. **V3.6.0** over **V3.2.0** for the same source line when applicable — always confirm model match first).
2. **SC2000 Fiber Laser Cutting System** — full system package ZIP **v1.0.392.10** (~17.2 MB) with extracted folder twin.
3. **Raycus Fiber Laser Management Installation** — LCM / FiberLaserManagement utility ZIP (~17.0 MB) used for Raycus source status, params, and alarm-record clear (see English guide [`How to clear alarm record in laser debug.pdf`](https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/How%20to%20clear%20alarm%20record%20in%20laser%20debug.pdf) in Firmwares).
4. **CypCut laser software installers** — `RAYCUT CypCut Laser Software Ver. 6.3.763.12.exe` (**newer**) and `…763.10.exe` (older). Prefer **6.3.763.12** when installing/updating unless support pins an older build.
5. **Machine-serial / model config packages** — LF-1530 1000W / 2000W folders (serial-tagged) with `.cfgpkg` CypCut configs; root `CypCut 1530 *W Raycus.cfgpkg` twins; `BCS100 V3.0 EXPORT.BFG` height-controller export. These are **machine/model restore points**, not a general “flash this on every RAYCUT.” Wrong-machine restore risk — only when support directs. Support WhatsApp +27 60 600 7000.

Chinese-named QCW / source folders under Firmwares are noted locally but **not** indexed here (English-only rule).

## English manuals (pointers + KB copies)

| Guide | Local path | Online URL | Verified | KB action |
| --- | --- | --- | --- | --- |
| RAYCUT-Lite L5210H CNC Laser Cutting Controller Manual.pdf (~9.47 MB) — **English handbook** (controller manual) | `T:\U\C\RAYCUT-Fiber-Laser-Machine\RAYCUT-Lite L5210H CNC Laser Cutting Controller Manual.pdf` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RAYCUT-Lite%20L5210H%20CNC%20Laser%20Cutting%20Controller%20Manual.pdf | HTTP 200 | **Copied** to `sources/manuals/raycut/RAYCUT-Lite-L5210H-CNC-Laser-Cutting-Controller-Manual.pdf` |
| RAYCUT CypCut Laser Cutting Control Software Manual.pdf (~3.77 MB) — English CypCut software manual | `T:\U\C\RAYCUT-Fiber-Laser-Machine\RAYCUT CypCut Laser Cutting Control Software Manual.pdf` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RAYCUT%20CypCut%20Laser%20Cutting%20Control%20Software%20Manual.pdf | HTTP 200 | **Copied** to `sources/manuals/raycut/RAYCUT-CypCut-Laser-Cutting-Control-Software-Manual.pdf` |
| RAYCUT RayTools XC3000 Series Motion Control System of Laser Cutting User Manual.pdf (~5.53 MB) — English RayTools XC3000 motion-control manual | `T:\U\C\RAYCUT-Fiber-Laser-Machine\RAYCUT RayTools XC3000 Series Motion Control System of Laser Cutting User Manual.pdf` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RAYCUT%20RayTools%20XC3000%20Series%20Motion%20Control%20System%20of%20Laser%20Cutting%20User%20Manual.pdf | HTTP 200 | **Copied** to `sources/manuals/raycut/RAYCUT-RayTools-XC3000-Series-Motion-Control-User-Manual.pdf` |

English pointers listed above were **copied this deepen** (RFL-C3000S-CE user guide, CypCut-User-Manual-V6.3.6, FSCUT2000 user manual, alarm-clear how-to) plus a broad remaining English set under `sources/manuals/raycut/` -- see `drivers/raycut-software-notes.md`.

## Primary firmware / software packages

Base local dir: `T:\U\C\RAYCUT-Fiber-Laser-Machine\Firmwares\`  
Base URL: `https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/`

### A. Raycus RFL source firmware packages

| Package | Family / version | Payload note | Local path | Online URL | Size (approx) | Verified |
| --- | --- | --- | --- | --- | --- | --- |
| Raycut RFL5005 C500S-ST-0653A-V3.6.0 | RFL5005 / C500S-ST-0653A **V3.6.0** | ZIP + extracted folder twin | `...\Firmwares\Raycut RFL5005 C500S-ST-0653A-V3.6.0\` and `.zip` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20RFL5005%20C500S-ST-0653A-V3.6.0.zip ; folder https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20RFL5005%20C500S-ST-0653A-V3.6.0/ | ZIP ~2.10 MB | ZIP HTTP 200; folder HTTP 200 |
| Raycut RFL5005 C500S-ST-0654-V3.2.0 | RFL5005 / C500S-ST-0654 **V3.2.0** | ZIP + extracted folder twin | `...\Firmwares\Raycut RFL5005 C500S-ST-0654-V3.2.0\` and `.zip` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20RFL5005%20C500S-ST-0654-V3.2.0.zip | ZIP ~0.41 MB | ZIP HTTP 200 |
| Raycut RFL5005 C500S-ST-0654-V3.2.0 (Source) | RFL5005 / C500S-ST-0654 **V3.2.0 Source** | ZIP + extracted folder twin (source tree) | `...\Firmwares\Raycut RFL5005 C500S-ST-0654-V3.2.0 (Source)\` and `.zip` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20RFL5005%20C500S-ST-0654-V3.2.0%20(Source).zip | ZIP ~0.53 MB | ZIP HTTP 200 |
| Raycut Single Module C2000H-ST-0654B-V3.3.0 | Single-module / C2000H-ST-0654B **V3.3.0** | ZIP + extracted folder twin | `...\Firmwares\Raycut Single Module C2000H-ST-0654B-V3.3.0\` and `.zip` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20Single%20Module%20C2000H-ST-0654B-V3.3.0.zip ; folder …/Raycut%20Single%20Module%20C2000H-ST-0654B-V3.3.0/ | ZIP ~1.31 MB | ZIP HTTP 200; folder HTTP 200 |

### B. SC2000 cutting system + Raycus management utility

| Package | Family / version | Payload note | Local path | Online URL | Size (approx) | Verified |
| --- | --- | --- | --- | --- | --- | --- |
| SC2000 Fiber Laser Cutting System v1.0.392.10 | SC2000 **v1.0.392.10** | ZIP + extracted folder twin | `...\Firmwares\SC2000 Fiber Laser Cutting System v1.0.392.10\` and `.zip` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/SC2000%20Fiber%20Laser%20Cutting%20System%20v1.0.392.10.zip ; folder …/SC2000%20Fiber%20Laser%20Cutting%20System%20v1.0.392.10/ | ZIP ~17.23 MB | ZIP HTTP 200; folder HTTP 200 |
| Raycus Fiber Laser Management Installation | Raycus LCM / FiberLaserManagement | ZIP + extracted install tree (`FiberLaserManagement.exe`, LCM399/4000/4100/800) | `...\Firmwares\Raycus Fiber Laser Management Installation\` and `.zip` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycus%20Fiber%20Laser%20Management%20Installation.zip ; folder …/Raycus%20Fiber%20Laser%20Management%20Installation/ | ZIP ~17.01 MB | ZIP HTTP 200; folder HTTP 200 |

### C. CypCut laser software installers (newer wins)

| Package | Family / version | Payload note | Local path | Online URL | Size (approx) | Verified |
| --- | --- | --- | --- | --- | --- | --- |
| RAYCUT CypCut Laser Software Ver. 6.3.763.12.exe | CypCut **6.3.763.12** (prefer) | Installer EXE only | `...\Firmwares\RAYCUT CypCut Laser Software Ver. 6.3.763.12.exe` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/RAYCUT%20CypCut%20Laser%20Software%20Ver.%206.3.763.12.exe | ~87.96 MB | EXE HTTP 200 |
| RAYCUT CypCut Laser Software Ver. 6.3.763.10.exe | CypCut **6.3.763.10** (older) | Installer EXE only | `...\Firmwares\RAYCUT CypCut Laser Software Ver. 6.3.763.10.exe` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/RAYCUT%20CypCut%20Laser%20Software%20Ver.%206.3.763.10.exe | ~109.19 MB | EXE HTTP 200 |

Root product folder CypCUT **6.3 765.5** / **765.4** and RayTools XC3000S EXEs are now indexed in section E (binaries URL-only).

### D. Model / machine config + BCS100 export

| Package | Role | Payload note | Local path | Online URL | Size (approx) | Verified |
| --- | --- | --- | --- | --- | --- | --- |
| CypCut 1530 1000W Raycus.cfgpkg | Model config LF-1530 1000W Raycus | CypCut `.cfgpkg` | `...\Firmwares\CypCut 1530 1000W Raycus.cfgpkg` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/CypCut%201530%201000W%20Raycus.cfgpkg | ~0.10 MB | HTTP 200 |
| CypCut 1530 2000W Raycus.cfgpkg | Model config LF-1530 2000W Raycus | CypCut `.cfgpkg` | `...\Firmwares\CypCut 1530 2000W Raycus.cfgpkg` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/CypCut%201530%202000W%20Raycus.cfgpkg | ~0.06 MB | HTTP 200 |
| 255696098780 - LF-1530 1000W | Machine-serial folder (1000W) | `CypCut.cfgpkg` + `EXPORT.BFG` | `...\Firmwares\255696098780 - LF-1530 1000W\` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/255696098780%20-%20LF-1530%201000W/ | folder present | folder HTTP 200 |
| 573688928360 - LF-1530 2000W | Machine-serial folder (2000W) | `3015-0089358.cfgpkg` + C500S-ST-0654 V3.2 ZIP + CypCUT 765.4 EXE | `...\Firmwares\573688928360 - LF-1530 2000W\` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/573688928360%20-%20LF-1530%202000W/ | folder present | folder HTTP 200 |
| BCS100 V3.0 EXPORT.BFG | BCS100 height-controller export | `.BFG` export file | `...\Firmwares\BCS100 V3.0 EXPORT.BFG` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/BCS100%20V3.0%20EXPORT.BFG | ~4 KB | HTTP 200 |

Parent Firmwares index https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/ — **HTTP 200**. Product root https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/ — **HTTP 200**.

**Firmware / software / config package entries documented: 14 prior + 6 appended this deepen** (prior 14 unchanged; plus 2 root CypCUT 765.x EXEs + 2 RayTools XC3000S EXEs + 2D CutAhead install folder + 2D CutAhead `.ofbk` configs). VBA APK is pointer-only (not counted as firmware).

### E. Root CypCUT 765.x + RayTools XC3000S installers (newer wins)

Product-root installers (not under `Firmwares\`). Binaries **not** copied.

| Package | Family / version | Payload note | Local path | Online URL | Size (approx) | Verified |
| --- | --- | --- | --- | --- | --- | --- |
| AM.CO.ZA RAYCUT CypCUT ... 6.3 765.5 20220802113919.exe | CypCut **6.3 765.5** (prefer) | Installer EXE | product root | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/AM.CO.ZA%20RAYCUT%20CypCUT%20Fiber%20Laser%20Cutting%20Software%206.3%20765.5%2020220802113919.exe | ~97.27 MB | EXE HTTP 200 (this pass) |
| AM.CO.ZA RAYCUT CypCUT ... 6.3 765.4 20220517204637.exe | CypCut **6.3 765.4** (older) | Installer EXE | product root | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/AM.CO.ZA%20RAYCUT%20CypCUT%20Fiber%20Laser%20Cutting%20Software%206.3%20765.4%2020220517204637.exe | ~96.58 MB | (not re-HEAD; twin of 765.5) |
| AM.CO.ZA RAYCUT RayTools XC3000S V2.4.2.30794_Em.exe | XC3000S **V2.4.2.30794** (prefer) | Installer EXE | product root | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/AM.CO.ZA%20RAYCUT%20RayTools%20XC3000S%20V2.4.2.30794_Em.exe | ~307.58 MB | EXE HTTP 200 (this pass) |
| AM.CO.ZA RAYCUT RayTools XC3000S V2.4.2.26567_Em.exe | XC3000S **V2.4.2.26567** (older) | Installer EXE | product root | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/AM.CO.ZA%20RAYCUT%20RayTools%20XC3000S%20V2.4.2.26567_Em.exe | ~336.77 MB | (not re-HEAD; twin of 30794) |

Extracted CypCUT tree `AM.CO.ZA RAYCUT CypCUT Fiber Laser Cutting Software Installaed Package\` (+ `.zip` ~405 MB) is a pointer only (duplicate of the 765.x install).

### F. RayTools 2D CutAhead (appended this deepen)

| Package | Role | Payload note | Local path | Online URL | Size (approx) | Verified |
| --- | --- | --- | --- | --- | --- | --- |
| RayTools 2D CutAhead Raytool Software Installation | CutAhead 2.0 install tree | `2DCutAhead2.0` + ScopeView + VideoMonitor | `...\Firmwares\RayTools 2D CutAhead Raytool Software Installation\` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/RayTools%202D%20CutAhead%20Raytool%20Software%20Installation/ | folder present | folder HTTP 200 (this pass) |
| RayTools 2D CutAhead Configurations | Machine `.ofbk` backups | 1530-3000W 2DCutAhead2.0 (2.4.2.26567) dated 2024-03-03 and 2024-05-29 | `...\Firmwares\RayTools 2D CutAhead Configurations\` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/RayTools%202D%20CutAhead%20Configurations/ | two `.ofbk` ~0.51-0.53 MB | (folder present locally; not re-HEAD) |

### G. RayTools VBA Visual Beam Aligner (pointer)

| Package | Role | Payload note | Local path | Online URL | Size (approx) | Verified |
| --- | --- | --- | --- | --- | --- | --- |
| RayTools VBA (Visual Beam Aligner) WiFi Module Edition User Manual 20260203.pdf | English VBA manual | **Copied** this pass | `...\RayTools VBA Visual Beam Aligner\` | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RayTools%20VBA%20Visual%20Beam%20Aligner/RayTools%20VBA%20(Visual%20Beam%20Aligner)%20WiFi%20Module%20Edition%20User%20Manual%2020260203.pdf | ~0.55 MB | PDF HTTP 200 (this pass) |
| RayTools VBA AI VAS Android App 1.2.2.1.apk | Android app | **Not copied** (huge APK) | same folder | https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RayTools%20VBA%20Visual%20Beam%20Aligner/RayTools%20VBA%20AI%20VAS%20Android%20App%201.2.2.1.apk | ~51.6 MB | (not re-HEAD) |


## URL verification notes (`fetched_at` 2026-08-13T10:54:00Z; prior 2026-08-12T22:33:00Z still listed)

**Confirmed HTTP 200 (HEAD):**

- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20RFL5005%20C500S-ST-0653A-V3.6.0.zip
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20RFL5005%20C500S-ST-0653A-V3.6.0/
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20RFL5005%20C500S-ST-0654-V3.2.0.zip
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20RFL5005%20C500S-ST-0654-V3.2.0%20(Source).zip
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20Single%20Module%20C2000H-ST-0654B-V3.3.0.zip
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycut%20Single%20Module%20C2000H-ST-0654B-V3.3.0/
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/SC2000%20Fiber%20Laser%20Cutting%20System%20v1.0.392.10.zip
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/SC2000%20Fiber%20Laser%20Cutting%20System%20v1.0.392.10/
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycus%20Fiber%20Laser%20Management%20Installation.zip
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/Raycus%20Fiber%20Laser%20Management%20Installation/
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/RAYCUT%20CypCut%20Laser%20Software%20Ver.%206.3.763.12.exe
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/RAYCUT%20CypCut%20Laser%20Software%20Ver.%206.3.763.10.exe
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/CypCut%201530%201000W%20Raycus.cfgpkg
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/CypCut%201530%202000W%20Raycus.cfgpkg
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/255696098780%20-%20LF-1530%201000W/
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/573688928360%20-%20LF-1530%202000W/
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/BCS100%20V3.0%20EXPORT.BFG
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/How%20to%20clear%20alarm%20record%20in%20laser%20debug.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RAYCUT-Lite%20L5210H%20CNC%20Laser%20Cutting%20Controller%20Manual.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RAYCUT%20CypCut%20Laser%20Cutting%20Control%20Software%20Manual.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RAYCUT%20RayTools%20XC3000%20Series%20Motion%20Control%20System%20of%20Laser%20Cutting%20User%20Manual.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Component%20Manuals/
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Component%20Manuals/CypCut-User-Manual-V6.3.6.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Component%20Manuals/FSCUT2000%20Fiber%20Laser%20Cutting%20Control%20System%20User%20Manual.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Raycus%20RFL-C3000S-CE%20Continuous-Wave%20Fiber%20Laser%20User%20Guide.pdf

**Confirmed HTTP 200 (HEAD) this deepen (2026-08-13T10:54:00Z):**

- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Raycus%20RFL-C3000S-CE%20Continuous-Wave%20Fiber%20Laser%20User%20Guide.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RAYCUT%20Fiber%20Laser%20Startup%20Parameters.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Component%20Manuals/CypCut-User-Manual-V6.3.6.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Component%20Manuals/FSCUT2000%20Fiber%20Laser%20Cutting%20Control%20System%20User%20Manual.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Component%20Manuals/RayTools%20XCS3000S%20Laser%20Cutting%20System%20Commissioning%20Manual.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/How%20to%20Adjust%20CMA%20ITV%20Electro-Pneumatic%20Regulator.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/How%20to%20clear%20alarm%20record%20in%20laser%20debug.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/AM.CO.ZA%20RAYCUT%20CypCUT%20Fiber%20Laser%20Cutting%20Software%206.3%20765.5%2020220802113919.exe
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/AM.CO.ZA%20RAYCUT%20RayTools%20XC3000S%20V2.4.2.30794_Em.exe
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/RayTools%202D%20CutAhead%20Raytool%20Software%20Installation/
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RayTools%20VBA%20Visual%20Beam%20Aligner/RayTools%20VBA%20(Visual%20Beam%20Aligner)%20WiFi%20Module%20Edition%20User%20Manual%2020260203.pdf
- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/RAYCUT%20Fiber%20Laser%20Cutter%20SAHPRA%20License%20for%20Non-Medical%20Devices.pdf

**Soft-fail / 404 (probes):**

- https://cncu.co.za/RAYCUT-Fiber-Laser-Machine/Firmwares/MISSING.zip — **404** (sanity probe)

## Related English handbook + manuals (this batch)

| Item | Local | Online | KB action |
| --- | --- | --- | --- |
| RAYCUT-Lite L5210H CNC Laser Cutting Controller Manual.pdf (~9.47 MB) | product root | HTTP 200 | **Copied** → `sources/manuals/raycut/RAYCUT-Lite-L5210H-CNC-Laser-Cutting-Controller-Manual.pdf` |
| RAYCUT CypCut Laser Cutting Control Software Manual.pdf (~3.77 MB) | product root | HTTP 200 | **Copied** → `sources/manuals/raycut/RAYCUT-CypCut-Laser-Cutting-Control-Software-Manual.pdf` |
| RAYCUT RayTools XC3000 Series Motion Control System of Laser Cutting User Manual.pdf (~5.53 MB) | product root | HTTP 200 | **Copied** → `sources/manuals/raycut/RAYCUT-RayTools-XC3000-Series-Motion-Control-User-Manual.pdf` |

English component / software manuals from `Component Manuals\` were **copied this deepen** (cutting heads, servos, compressor, FSCUT2000, CypCut V6.3.6, CypOne, FLCAM, XCS3000S commissioning, ITV, IPG sheets). Chinese-named PDFs still skipped.

## Scope

Read-only from `T:\U\C`. Writes only under `T:\V`. Did not crawl buythis or YouTube. One product line: **RAYCUT-Fiber-Laser-Machine**. Firmware batch plus **deepen** this pass (English manuals/how-tos/components/software notes copied; binaries still URL-only).