---
title: TruCUT CO2 Laser Firmware Index (CNCU local)
source_url: https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/
fetched_at: 2026-08-13T09:58:00Z
category: drivers
pass: cncu-local-trucut-firmware-batch + trucut-deepen
product: TruCUT CO2 Laser Machine (Ruida / MPC6565 / MPC6585 / 8530 control)
---

# TruCUT CO2 Laser — Firmware Index

Inventory of **controller firmware update packages** and related reset/backup assets from the local cncu.co.za mirror under `T:\U\C\TruCUT-CO2-Laser-Machine\`, mapped to live `https://cncu.co.za/...` URLs.
English prose only. **No pricing.** Firmware binaries themselves are **not** copied into this KB (pointer + URL only).

## What this firmware is

Older TruCUT CO2 lasers (especially **2016+ Lite / Express-era MPC boards**) use **MPC6565 / MPC6585 / 8530**-family motion controllers. Packages under `Machine Reset Software\` are **firmware image folders** (`.3DF` / `.3DH` / `.8FH` / `.8fh` payloads) plus `Laser-Reset.exe` and an English update guide.

Newer **RDWorks / Ruida RDC64xx** machines are usually updated via RDWorks software packages (year-model folders at the product root); this batch indexes the **Machine Reset Software firmware trees** plus `Firmwares\Backup` RDVSet parameter backups. Prefer the **newest matching board family** when support directs a reset (e.g. newest **8530 4.5.1.x** or **6585 4.5.0.x** for that controller). **Newer wins.**

## English upgrade notes (pointers)

| Guide | Local path | Online URL | Verified |
| --- | --- | --- | --- |
| How to Update Trucut Laser Cutter Firmware | `T:\U\C\TruCUT-CO2-Laser-Machine\Machine Reset Software\How to Update Trucut Laser Cutter Firmware.pdf` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/How%20to%20Update%20Trucut%20Laser%20Cutter%20Firmware.pdf | HTTP 200 |
| MPC6585 Hardware Manual V1.4 | `...\Machine Reset Software\MPC6585 Hardware Manual-V1.4.pdf` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/MPC6585%20Hardware%20Manual-V1.4.pdf | HTTP 200 |
| Operation Introduction | `...\Machine Reset Software\Operation Introduction.pdf` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/Operation%20Introduction.pdf | (listed with package; not re-HEADed this pass) |
| RDWorks settings backup tip image | `...\Firmwares\Backup\RDWorks Laser Machine Settings Backup and Recovery.png` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Firmwares/Backup/RDWorks%20Laser%20Machine%20Settings%20Backup%20and%20Recovery.png | (local present) |

**Update summary (from English guide title + page extract):** for **TruCUT 2016+ model** firmware updates — power off the laser cutter, use USB mass storage with the matching firmware folder contents, then follow the PDF steps with `Laser-Reset.exe` / board-specific image. Risk of brick or wrong-board mismatch — only when support directs. Support WhatsApp +27 60 600 7000.

## Controller firmware packages (primary)

Base local dir: `T:\U\C\TruCUT-CO2-Laser-Machine\Machine Reset Software\`  
Base URL: `https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/`

| Package | Board / version | Payload note | Local path | Online URL | Size (approx) | Verified |
| --- | --- | --- | --- | --- | --- | --- |
| 6565 Firmware Update to Ver.4.4.0.05 | MPC6565 4.4.0.05 | `65654405.3DF` + `.3DH` + `mpc05ls.dll` | `...\6565 Firmware Update to Ver.4.4.0.05\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6565%20Firmware%20Update%20to%20Ver.4.4.0.05/ | 697 KB | HTTP 200 |
| 6565 Firmware Update to Ver.4.4.0.06 | MPC6565 4.4.0.06 | `65654406.3DF` (+ root ZIP) | `...\6565 Firmware Update to Ver.4.4.0.06\` and `...\6565 Firmware Update to Ver.4.4.0.06.zip` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6565%20Firmware%20Update%20to%20Ver.4.4.0.06/ ; ZIP https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6565%20Firmware%20Update%20to%20Ver.4.4.0.06.zip | 689 KB folder / 160 KB ZIP | ZIP HTTP 200 |
| 6585 Firmware Update to Ver.4.5.0.190 | MPC6585 4.5.0.190 | `658545019.8fh` | `...\6585 Firmware Update to Ver.4.5.0.190\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6585%20Firmware%20Update%20to%20Ver.4.5.0.190/ | 826 KB | Listed (folder pattern 200) |
| 6585 Firmware Update to Ver.4.5.0.251 | MPC6585 4.5.0.251 | `6585_4.5.0.251_Setting_Reset.8FH` | `...\6585 Firmware Update to Ver.4.5.0.251\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6585%20Firmware%20Update%20to%20Ver.4.5.0.251/ | 821 KB | Listed |
| 6585 Firmware Update to Ver.4.5.0.330 | MPC6585 4.5.0.330 | `45033.8FH` | `...\6585 Firmware Update to Ver.4.5.0.330\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6585%20Firmware%20Update%20to%20Ver.4.5.0.330/ | 823 KB | Listed |
| 6585 Firmware Update to Ver.4.5.0.380 | MPC6585 4.5.0.380 | `45038.8FH` | `...\6585 Firmware Update to Ver.4.5.0.380\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6585%20Firmware%20Update%20to%20Ver.4.5.0.380/ | 824 KB | Listed |
| 6585 Firmware Update to Ver.4.5.0.480 | MPC6585 4.5.0.480 | `04050048.8FH` | `...\6585 Firmware Update to Ver.4.5.0.480\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6585%20Firmware%20Update%20to%20Ver.4.5.0.480/ | 840 KB | HTTP 200 |
| 8530 Firmware Update to Ver.4.5.1.050 | 8530 4.5.1.050 | `04050105.8FH` | `...\8530 Firmware Update to Ver.4.5.1.050\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/8530%20Firmware%20Update%20to%20Ver.4.5.1.050/ | 843 KB | Listed |
| 8530 Firmware Update to Ver.4.5.1.070 | 8530 4.5.1.070 | `04050107.8FH` | `...\8530 Firmware Update to Ver.4.5.1.070\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/8530%20Firmware%20Update%20to%20Ver.4.5.1.070/ | 844 KB | Listed |
| 8530 Firmware Update to Ver.4.5.1.290 | 8530 4.5.1.290 | `04050129.8FH` | `...\8530 Firmware Update to Ver.4.5.1.290\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/8530%20Firmware%20Update%20to%20Ver.4.5.1.290/ | 851 KB | HTTP 200 |

**Firmware update package entries documented: 10** (plus one ZIP twin for 6565 4.4.0.06).

## Related reset / config packages (same folder)

| Item | What it is | Local path | Online URL | Size | Verified |
| --- | --- | --- | --- | --- | --- |
| Laser-Reset.exe | Reset / flash helper | `...\Machine Reset Software\Laser-Reset.exe` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/Laser-Reset.exe | 20 KB | HTTP 200 |
| 01010032.LEF | LEF firmware/image payload | `...\Machine Reset Software\01010032.LEF` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/01010032.LEF | 1.4 MB | HTTP 200 |
| RDWorks RDC6445G(EC) | TruCUT-6040L.cfg + RDVSet | `...\Machine Reset Software\RDWorks RDC6445G(EC)\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/RDWorks%20RDC6445G(EC)/ | 315 KB | HTTP 200 |
| LC-1390 Double Laser RDWorks | LC-1390D.RDVSet | `...\Machine Reset Software\LC-1390 Double Laser RDWorks\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/LC-1390%20Double%20Laser%20RDWorks/ | 19 KB | Listed |
| Software Packages | LaserCut2017 installers (not controller FW) | `...\Machine Reset Software\Software Packages\` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/Software%20Packages/ | ~89 MB | Listed (not primary FW) |

## Firmwares\Backup — RDWorks parameter backups

Base: `T:\U\C\TruCUT-CO2-Laser-Machine\Firmwares\Backup\`  
URL base: `https://cncu.co.za/TruCUT-CO2-Laser-Machine/Firmwares/Backup/`

| Backup file | Local | Online URL | Verified |
| --- | --- | --- | --- |
| 1390 Default 2024.RDVSet | `...\Firmwares\Backup\1390 Default 2024.RDVSet` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Firmwares/Backup/1390%20Default%202024.RDVSet | HTTP 200 |
| 1390fz.RDVSet | `...\Firmwares\Backup\1390fz.RDVSet` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Firmwares/Backup/1390fz.RDVSet | Listed |
| LC-1060L … Config .cfg + X/Y/Z .RDVSet | `...\Firmwares\Backup\LC-1060L 231863508823 *` | under Firmwares/Backup/ | Listed |
| LC-1390 CCD 1155006934556.RDVSet | `...\Firmwares\Backup\LC-1390 CCD 1155006934556.RDVSet` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/Firmwares/Backup/LC-1390%20CCD%201155006934556.RDVSet | HTTP 200 |

Folder index https://cncu.co.za/TruCUT-CO2-Laser-Machine/Firmwares/ and `Firmwares/Backup/` both **HTTP 200**.

## URL verification notes (`fetched_at` 2026-08-12T22:00:00Z)

**Confirmed HTTP 200 (HEAD):**

- https://cncu.co.za/TruCUT-CO2-Laser-Machine/
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Firmwares/
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Firmwares/Backup/
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6565%20Firmware%20Update%20to%20Ver.4.4.0.06.zip
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6565%20Firmware%20Update%20to%20Ver.4.4.0.05/
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/6585%20Firmware%20Update%20to%20Ver.4.5.0.480/
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/8530%20Firmware%20Update%20to%20Ver.4.5.1.290/
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/How%20to%20Update%20Trucut%20Laser%20Cutter%20Firmware.pdf
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/Laser-Reset.exe
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/MPC6585%20Hardware%20Manual-V1.4.pdf
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/01010032.LEF
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Machine%20Reset%20Software/RDWorks%20RDC6445G(EC)/
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Firmwares/Backup/1390%20Default%202024.RDVSet
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/Firmwares/Backup/LC-1390%20CCD%201155006934556.RDVSet
- https://cncu.co.za/TruCUT-CO2-Laser-Machine/TruCUT%20Laser%20Software%20Manual%20(Draft).pdf

**Soft-fail / 404:**

- https://cncu.co.za/TruCUT-CO2-Laser-Machine/CO2%20Laser%20Cutting%20(Second%20Edition).pdf — **404** (file exists on local mirror only; copied into KB manuals)

## Related English handbook (this batch)

| Book | Local | Online | KB action |
| --- | --- | --- | --- |
| CO2 Laser Cutting (Second Edition).pdf (~16.2 MB) | `T:\U\C\TruCUT-CO2-Laser-Machine\CO2 Laser Cutting (Second Edition).pdf` | inferred URL above — **404 soft-fail** | **Copied** to `sources/manuals/trucut/CO2-Laser-Cutting-Second-Edition.pdf` |

Also noted (not copied this pass): [`TruCUT Laser Software Manual (Draft).pdf`](https://cncu.co.za/TruCUT-CO2-Laser-Machine/TruCUT%20Laser%20Software%20Manual%20(Draft).pdf) (~3.6 MB, online **200**) and Ruida `RDWorks V8 Laser Engraving Cutting Software User Manual.pdf` (~4.5 MB) under `Ruida Motion Control\`.

## Scope

Read-only from `T:\U\C`. Writes only under `T:\V`. Did not crawl buythis or YouTube. One product line: TruCUT CO2 Laser Machine.

## TruCUT-Express / LaserCEO firmware (gap fill — deepen pass)

Prior batch indexed **10** MPC6565/6585/8530 packages under `Machine Reset Software\` plus `Firmwares\Backup` RDVSet. This deepen pass adds **TruCUT-Express** controller / LaserCEO packages that were not listed. Binaries remain URL pointers (not copied). **Newer wins.**

Base local: `T:\U\C\TruCUT-CO2-Laser-Machine\TruCUT-Express Laser 2020+ Model Software\Firmwares\`  
Base URL: `https://cncu.co.za/TruCUT-CO2-Laser-Machine/TruCUT-Express%20Laser%202020+%20Model%20Software/Firmwares/`

| Package | Role | Local path | Online URL | Size (approx) | Verified |
| --- | --- | --- | --- | --- | --- |
| CNELaser-x64-0.5.10.7-released | older LaserCEO/CNELaser | `...\Firmwares\CNELaser-x64-0.5.10.7-released\` + `.zip` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/TruCUT-Express%20Laser%202020+%20Model%20Software/Firmwares/CNELaser-x64-0.5.10.7-released.zip | 84.8 MB ZIP | Listed |
| CNELaser-x64-0.5.10.11-released | mid | `...\Firmwares\CNELaser-x64-0.5.10.11-released\` + `.zip` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/TruCUT-Express%20Laser%202020+%20Model%20Software/Firmwares/CNELaser-x64-0.5.10.11-released.zip | 85.0 MB ZIP | Listed |
| CNELaser-x64-0.5.10.19-released | **newest / prefer** | `...\Firmwares\CNELaser-x64-0.5.10.19-released\` + `.zip` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/TruCUT-Express%20Laser%202020+%20Model%20Software/Firmwares/CNELaser-x64-0.5.10.19-released.zip | 84.8 MB ZIP | HTTP 200 |
| LaserController x86 v20210609 | older Express controller | `...\Firmwares\LaserController x86 v20210609\` + `.zip` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/TruCUT-Express%20Laser%202020+%20Model%20Software/Firmwares/LaserController%20x86%20v20210609.zip | 32.1 MB ZIP | Listed |
| AT_Laser22080418.bin | Express BIN payload | `...\Firmwares\BIN Files\AT_Laser22080418.bin` | https://cncu.co.za/TruCUT-CO2-Laser-Machine/TruCUT-Express%20Laser%202020+%20Model%20Software/Firmwares/BIN%20Files/AT_Laser22080418.bin | 200 KB | HTTP 200 |

Folder index https://cncu.co.za/TruCUT-CO2-Laser-Machine/TruCUT-Express%20Laser%202020+%20Model%20Software/Firmwares/ **HTTP 200**. Demo_LaserLib / Demo.x64 trees are demo+activation (not primary FW). `mdmcpq.inf` + `usbser.sys` are USB-serial driver drops (see `drivers/trucut-software-notes.md`). Huge [`TruCUT-Express Convert To TruCUT RD6445G.pdf`](https://cncu.co.za/TruCUT-CO2-Laser-Machine/TruCUT-Express%20Laser%202020+%20Model%20Software/Firmwares/TruCUT-Express%20Convert%20To%20TruCUT%20RD6445G.pdf) (~47.1 MB) skipped as huge media; English wiring already copied (~16.3 MB, HTTP 200).

**Express firmware entries documented: 5** (3 CNELaser + 1 LaserController + 1 BIN). Combined with prior **10** MPC packages = **15** controller FW packages. Prefer **CNELaser-x64-0.5.10.19** on Express; prefer newest matching MPC board family on Lite/reset.

## Deepen pass notes (`fetched_at` 2026-08-13T09:58:00Z / 11:58 SAST)

English manuals / how-tos / component docs / software notes copied under `sources/manuals/trucut/` (see `manuals-and-guides-index.md` and `drivers/trucut-software-notes.md`). Sample cncu URLs re-verified HTTP **200**: Software Manual (Draft), Beam Alignment, RDC6445G (S) V1.3, RDWorks V8 user manual, HY T-series PSU, Express Firmwares folder + CNELaser 0.5.10.19 ZIP + AT_Laser BIN, Upgrade-to-2019, Express-to-Standard wiring, Ruida User Manuals/, Component Manuals/. Handbook `CO2 Laser Cutting (Second Edition).pdf` remains **404** online (local only). Fiber/welder Ruida manuals not copied. Chinese-only skipped. Pricelists skipped. Firmware binaries still not copied.