---
title: TruCUT RDWorks (Mini-Series) Design Type Workflows, Video Index about this Feature
source_url: https://softwaretraining.co.za/design-workflows-using-trucut-rdworks-software-mini-series-video-index
published: 2021-10-08 14:41:23
modified: 2021-12-09 14:34:26
fetched_at: 2026-08-30T21:58:46+0200
category: training
wp_site: https://softwaretraining.co.za
wp_prefix: softwaretraining_co_za
wp_id: 5695
wp_type: post
pass: qmm-wp-mysql-digest-2026-08-30
notes: qmm_wp published digest; public permalink; no wp internals in body.
---
# TruCUT RDWorks (Mini-Series) Design Type Workflows, Video Index about this Feature

**Source:** [https://softwaretraining.co.za/design-workflows-using-trucut-rdworks-software-mini-series-video-index](https://softwaretraining.co.za/design-workflows-using-trucut-rdworks-software-mini-series-video-index)

- published: 2021-10-08 14:41:23
- modified: 2021-12-09 14:34:26

This is an index covering a mini-series video about different Design Workflows that you may use.
Index Below.

In this series we will be covering a few different design workflows, things like following measurement requirements, all the way to creating complex shapes.

**PART 1 - Design - Ellipse to Measurement**

[https://softwaretraining.co.za/working-with-measurements-on-ellipse-shapes-within-trucut-rdworks-part-1](https://softwaretraining.co.za/working-with-measurements-on-ellipse-shapes-within-trucut-rdworks-part-1)

**PART 2 - Design - Design to Page Location**

[https://softwaretraining.co.za/how-to-pin-point-a-shape-onto-your-page-within-the-trucut-rdworks-part-2](https://softwaretraining.co.za/how-to-pin-point-a-shape-onto-your-page-within-the-trucut-rdworks-part-2)

**PART 3 - Design - Triangle Shape**

[https://softwaretraining.co.za/how-to-make-a-triangle-object-within-the-trucut-rdworks-software-part-3](https://softwaretraining.co.za/how-to-make-a-triangle-object-within-the-trucut-rdworks-software-part-3)

**PART 4 - Design - 4 Point Star**

[https://softwaretraining.co.za/making-a-four-point-star-shape-within-the-trucut-rdworks-software-part-4](https://softwaretraining.co.za/making-a-four-point-star-shape-within-the-trucut-rdworks-software-part-4)

**PART 5 - Design - 5 Point Star P1**

[https://softwaretraining.co.za/how-to-design-a-five-point-star-using-the-trucut-rdworks-software-part-5](https://softwaretraining.co.za/how-to-design-a-five-point-star-using-the-trucut-rdworks-software-part-5)

**PART 6 - Design - 5 Point Star P2**

[https://softwaretraining.co.za/part-2-on-designing-a-five-point-star-within-trucut-rdworks-software-part-6](https://softwaretraining.co.za/part-2-on-designing-a-five-point-star-within-trucut-rdworks-software-part-6)

**PART 7 - Design - 6 Point Star**

[https://softwaretraining.co.za/make-a-six-pointed-star-using-guides-within-trucut-rdworks-software-part-7](https://softwaretraining.co.za/make-a-six-pointed-star-using-guides-within-trucut-rdworks-software-part-7)

**PART 8 - Design - Tracing a Star**

[https://softwaretraining.co.za/how-to-trace-a-star-shape-using-a-bitmap-within-the-trucut-rdworks-part-8](https://softwaretraining.co.za/how-to-trace-a-star-shape-using-a-bitmap-within-the-trucut-rdworks-part-8)

**PART 9 - Design - Tracing a Crescent**

[https://softwaretraining.co.za/tracing-a-crescent-shape-with-the-curve-tool-within-trucut-rdworks-part-9](https://softwaretraining.co.za/tracing-a-crescent-shape-with-the-curve-tool-within-trucut-rdworks-part-9)

**PART 10 - Design - Tracing a Semicircle**

[https://softwaretraining.co.za/creating-a-traced-semicircle-shape-in-the-trucut-rdworks-software-part-10](https://softwaretraining.co.za/creating-a-traced-semicircle-shape-in-the-trucut-rdworks-software-part-10)

**PART 11 - Design - Tracing Custom Shapes**

[https://softwaretraining.co.za/how-to-go-about-tracing-a-custom-shape-within-the-trucut-rdworks-part-11](https://softwaretraining.co.za/how-to-go-about-tracing-a-custom-shape-within-the-trucut-rdworks-part-11)

**PART 12 - Design - Grouping**

[https://softwaretraining.co.za/how-to-go-about-grouping-your-designs-within-the-trucut-rdworks-part-12](https://softwaretraining.co.za/how-to-go-about-grouping-your-designs-within-the-trucut-rdworks-part-12)

**PART 13 - Design - Mirroring**

[https://softwaretraining.co.za/using-the-mirroring-feature-in-your-designs-with-trucut-rdworks-part-13](https://softwaretraining.co.za/using-the-mirroring-feature-in-your-designs-with-trucut-rdworks-part-13)