---
title: TruCUT RDWorks System Work Plat User Parameters Tab (Part 7) System Work Plate Mini-Series
source_url: https://softwaretraining.co.za/rdworks-user-parameters
source_ref: /workspace/dumps-check/softt.jsonl (URL https://softwaretraining.co.za/rdworks-user-parameters; dump Date 2024-02-19)
fetched_at: 2026-09-06T08:51:19Z
category: training
pass: softt-dump-rdworks-user-parameters
later_t_path: T:\V\sources\training\rdworks-user-parameters.md
notes: Boxed from softt.jsonl dump only (no live softwaretraining crawl). All dump fields kept. English transcript from dump.
---

# TruCUT RDWorks System Work Plat User Parameters Tab (Part 7) System Work Plate Mini-Series

**Source:** [https://softwaretraining.co.za/rdworks-user-parameters](https://softwaretraining.co.za/rdworks-user-parameters) (softwaretraining.co.za; boxed from softt.jsonl dump Date **2024-02-19**; live HTML was not crawled this pass). Fetched 2026-09-06T08:51:19Z / 2026-09-06T10:51:19 SAST. YouTube watch hotlinked only (`VoYZ9-hJ0i4`); live YouTube not crawled.

**What this is:** One AM.CO.ZA softwaretraining how-to page. Knowledge on this page is cited to the softwaretraining URL above. Dump fields below are complete for this softt.jsonl row. OpenAI KB attach skipped (Train stays 154).

## Dump record (all fields)

```json
{
  "URL": "https://softwaretraining.co.za/rdworks-user-parameters",
  "Title": "TruCUT RDWorks System Work Plat User Parameters Tab (Part 7) System Work Plate Mini-Series",
  "Date": "2024-02-19",
  "Transcript": "hi guys. In today's video, we're going to be having an overlook of the user parameters for the truth that already works, and this is the one is located under your system works plate. But before that, let's have a quick intro first, so today's video can be found on software training dot c o dot z A. We make sure it's easy to watch the problem solving videos, and we also have daily updates. Otherwise, back in the programme here. Now, just a quick reminder. This is a very serious on the system work plate, just as by located on the right, sometimes also referred to as the control panel also leave relevant links in description. So you guys going to follow them? No. When it comes to the user parameters because one of those places you don't actually wanna mess around unless you know what you're doing. Because this will really changed quite a lot. So under the tabs on top and I use the, uh, system works played. We actually user tab, this will be our user parameters. Now, this is for your software, the settings that will basically used for the cutting speed and so forth now what I would recommend. However, if you have newly installed or your machine is still running good or your Sorry to say your software, then you would want what you want to do is go here to the bottom. For some reason, you don't see these buttons. Let's move this because something a resolution this could happen. Then you just wanna navigate and you'll see it's a little too lines running past. If you have your mouse on it, I'm sorry. The one line on top of the two lines. Then you'll see it changes your mouse cursor to these two little arrows. And then, if you click that and you just simply drag down or left clicking, holding, you drag it down. You can see you can open this. Just make sure you don't drag it. So far, you start hiding settings at the bottom with the other day. Just do it far enough so you can still see both. Like I was mentioning. So what you wanna do if your programme is all new and that click the read option, but make sure your machine is connected, so if it's connected, you read or show you a little progress bar and then also successful. And then what you want to do is get safe. So you hit the safe and make a backup of it so that if ever and future, these settings mess up or someone changed them and you need to change him back, you can always go open, go find the original. So I would highly recommend this because you can really mess up your stuff quite a lot. Now, if for some other reason you do, uh, edit these and you want to write the changes, then you can simply just go here at the bottom, right, And then it will update it for you. And then on that note, I think it's good that we maybe have a quick, open look of, uh, Benda settings as well, which is very similar. But yeah, so under your file. And you can well, and you will see vendors settings. You click that, Then it will ask for password. The password. Simple R D 8888 or 48 So R for Romeo D for Delta and then 48 And then this will open. Listen, this will be for your actual machine settings, so obviously you will first have to click read. Then it will read the settings of your machine. And then I would also highly recommend if you don't have to, don't change these settings. Your machine can, um, act quite strange after that if you don't know what you're doing And likewise, if you if everything is running fine and clear, read you've got your safe and make a backup of that as well. And then you can like before you can change these settings. You have a few options here, and then you just click right if you want to update it or you click open if you want to load your back. Otherwise, that is it on a user parameters. Um, yeah, if we had yet to software training dot c o dot z day governments. We've got a variety of different software sort of cover, and also you can isolate your search on top of right here. If you do not, however, find the videos looking forward to school here, request a training video. Then we will make that video for you. But otherwise thanks guys for watching and chips",
  "Video Link": "https://www.youtube.com/watch?v=VoYZ9-hJ0i4"
}
```

## English how-to (from dump Transcript)

The dump `Transcript` is the step source for this page (auto-caption style kept as dump text; not invented).

hi guys. In today's video, we're going to be having an overlook of the user parameters for the truth that already works, and this is the one is located under your system works plate. But before that, let's have a quick intro first, so today's video can be found on software training dot c o dot z A. We make sure it's easy to watch the problem solving videos, and we also have daily updates. Otherwise, back in the programme here. Now, just a quick reminder. This is a very serious on the system work plate, just as by located on the right, sometimes also referred to as the control panel also leave relevant links in description. So you guys going to follow them? No. When it comes to the user parameters because one of those places you don't actually wanna mess around unless you know what you're doing. Because this will really changed quite a lot. So under the tabs on top and I use the, uh, system works played. We actually user tab, this will be our user parameters. Now, this is for your software, the settings that will basically used for the cutting speed and so forth now what I would recommend. However, if you have newly installed or your machine is still running good or your Sorry to say your software, then you would want what you want to do is go here to the bottom. For some reason, you don't see these buttons. Let's move this because something a resolution this could happen. Then you just wanna navigate and you'll see it's a little too lines running past. If you have your mouse on it, I'm sorry. The one line on top of the two lines. Then you'll see it changes your mouse cursor to these two little arrows. And then, if you click that and you just simply drag down or left clicking, holding, you drag it down. You can see you can open this. Just make sure you don't drag it. So far, you start hiding settings at the bottom with the other day. Just do it far enough so you can still see both. Like I was mentioning. So what you wanna do if your programme is all new and that click the read option, but make sure your machine is connected, so if it's connected, you read or show you a little progress bar and then also successful. And then what you want to do is get safe. So you hit the safe and make a backup of it so that if ever and future, these settings mess up or someone changed them and you need to change him back, you can always go open, go find the original. So I would highly recommend this because you can really mess up your stuff quite a lot. Now, if for some other reason you do, uh, edit these and you want to write the changes, then you can simply just go here at the bottom, right, And then it will update it for you. And then on that note, I think it's good that we maybe have a quick, open look of, uh, Benda settings as well, which is very similar. But yeah, so under your file. And you can well, and you will see vendors settings. You click that, Then it will ask for password. The password. Simple R D 8888 or 48 So R for Romeo D for Delta and then 48 And then this will open. Listen, this will be for your actual machine settings, so obviously you will first have to click read. Then it will read the settings of your machine. And then I would also highly recommend if you don't have to, don't change these settings. Your machine can, um, act quite strange after that if you don't know what you're doing And likewise, if you if everything is running fine and clear, read you've got your safe and make a backup of that as well. And then you can like before you can change these settings. You have a few options here, and then you just click right if you want to update it or you click open if you want to load your back. Otherwise, that is it on a user parameters. Um, yeah, if we had yet to software training dot c o dot z day governments. We've got a variety of different software sort of cover, and also you can isolate your search on top of right here. If you do not, however, find the videos looking forward to school here, request a training video. Then we will make that video for you. But otherwise thanks guys for watching and chips

## Dump Date

- **Date:** 2024-02-19

## Video Link

- https://www.youtube.com/watch?v=VoYZ9-hJ0i4