Unbox and Setup 5W UV Laser LabelMark Laser Marking Machine including Chiller Installation

Source: https://updating.co.za/5w-uv-laser-setup

• published: 2024-09-02 14:50:31
• modified: 2024-09-02 14:50:34
• youtube:
• https://www.youtube.com/watch?v=kFJatfWX7bM

The latest innovation from AM.CO.ZA, the 5W UV laser Labelmark Laser Marking Machine, arrives in a quality carton box containing a complete set, including the main unit, a chiller, and a rotary lift. This video guide will walk you through the unboxing, setup, and installation of your new machine to ensure a smooth start.

Watch Video below on YouTube:

https://www.youtube.com/watch?v=kFJatfWX7bM
Watch Video on YouTube: https://www.youtube.com/watch?v=kFJatfWX7bM

Unboxing

Begin by unsealing the carton box using a screwdriver to lift the seals. Pliers can be helpful if needed. Once the seals are open, remove the lid and carefully take out all the packaging used for travel safety. Place all items on the floor and remove any plastic wrapping.

The contents of the box should include:

• Height adjuster arm

• Chiller and chiller tubes

• Power supply for the chiller

• Signal line cable for the chiller

• Rotary unit and its power supply

• Micro step driver and power supply cable

• Clamp tools

• Foot pedal

• Toolkit

• Main unit, which is pre-connected to the laser arm

The toolbox contains a set of Allen keys, a small ruler, extra screws, safety glasses, a USB stick, and a USB topc cable. At this stage, you can contact the technicians from am.co.za to assist with the installation setup. However, if you prefer to set up the machine yourself, follow the instructions below.

Setup Guide

• Attach the Height Adjuster Arm:

Unscrew the four screws on the main unit.

• Place the height adjuster arm where the screws were removed and tighten them securely.

• Rotate the height adjustment arm to a comfortable height for working underneath it.

• Secure the Laser Arm:

Unscrew the four screws on the laser arm.

• Attach the laser arm to the height adjuster arm using the same screws.

• Position and Connect the Chiller:

Find a suitable location for the chiller.

• Connect the tubes as follows:

The tube with the one-way valve goes to the chiller outflow.

• The other end of this tube connects to the machine inlet flow.

• The machine's outlet flow tube connects to the chiller's inlet flow.

• Plug in the power cable for the chiller.

• Connect the cable marked "alarm" from the chiller to the main unit at the point labeled "signal line."

• Connect the Micro Step Driver and Rotary Unit:

Plug the rotary unit into the micro step driver using the connection plug.

• Connect the signal cable from the micro step driver to the main unit at the "rotary clamp" port.

• Attach the foot pedal to the main unit.

• Download the Driver and Software:

Visit CNC.co.za to download the driver and software.

• Follow the prompts to complete the download process.

• Subscribe for More Updates:

Subscribe to the AM.CO.ZA YouTube channel and click the bell icon to receive notifications on upcoming videos about the amazing LabelMark 5W UV Laser Marking Machine with rotary annular from AM.CO.ZA.

AM.CO.ZA has emerged as a leader in CNC routers and printing machines. With more than 11 years of experience, they offer a diverse range of advanced products, including CNC Routers, Large Format Printers, Vinyl Cutters, Laser Cutters, Plasma Cutters, and DTF Printers. Their solutions serve a wide array of sectors, from manufacturing and engineering to the creative arts.

Machines, Consumables and Parts Available from https://buythis.co.za#ai

For more info on Advanced Machinery visit https://am.co.za/

Subscribe to AM.CO.ZA’s YouTube Channel: https://www.youtube.com/@AchievementMatters?sub_confirmation=1

Chat with us by sending “hi” on WhatsApp to 060 600 6000​.