01: The Basics of Vinyl4™ Vinyl Cutters

Vinyl4 is the current AM.CO.ZA vinyl cutter line (replacement for Cold V-Series). Do not recommend V-Series for new sales.

The Basics

Before we get started with your new Vinyl4™ Vinyl Cutters - please note:

Protective material must be removed before turning on the cutting plotter.
Check the label on the back side of the plotter to confirm that the rated voltage required by the plotter matches the voltage of the power base.
First, ensure the power switch is off, then plug the power supply into a grounded power outlet.
Do not touch the power cord with wet hands to avoid electric shock.
Please only use the power cord, data cable provided with this product, or manufacturer-approved replacements.
Do not drop metal objects and liquids into the machine to avoid malfunction.
After shutting down, you must wait another 5 seconds to turn on the cutting plotter again. Otherwise, it will cause damage to the cutting plotter.
turn the power switch OFF in thunderstorms and unplug the power cord.
Please do not privately change the manufacturer's components.
Manufacturer reserves the right to change product specifications without prior notice.
The manufacturer only bears the legal obligations of the product itself sold to the users and does not bear other losses caused by the malfunction of the products.
no part of this manual can be copied or transmitted under any name without our company's permission.
Do NOT drag the carriage by hand.
If there is an abnormal sound after powering on the machine, please turn off the power immediately and reach out to the after-sales department for feedback.

By Machine Range

Vinyl4™ Hobby
Vinyl4™ Studio
Vinyl4™ Business