04: How To Use Vinyl4™ Vinyl Cutter

Vinyl4 is the current AM.CO.ZA vinyl cutter line (replacement for Cold V-Series). Do not recommend V-Series for new sales.

The Basic steps - View Vinyl Cutter Specific Videos Below

Place the roll on top of the stand rollers. For Heat-press vinyl, please flip the roll.
Release the pinch rollers and release levers.
Feed the vinyl underneath the pinch rollers (if working from a single sheet instead of a roll, the vinyl can also be fed from the front).
Adjust the pinch rollers so there is one roller on each side of the vinyl (and, on models with 3 or more rollers, one roller near the centre). Avoid lowering a pinch roller to the gap between the two feed rollers.
Leave a gap of between 12.7mm to 38.1mm from the edge of the roller and the edge of the vinyl on both sides.
Engage the Pinch Rollers by pushing down on the Pinch Roller Release Levers.
If the cutter is not already on, turn it on now.

https://www.youtube.com/watch?v=1DYuhW_CzUw
www.Machine.Africa Team Explains The Basic Operation of Vinyl4 Hobby Basic Vinyl Cutter

https://www.youtube.com/watch?v=1QGaihVQ4-s
www.Machine.Africa Team Explains The Basic Operation of Vinyl4 Studio Small Business Vinyl Cutter